Intercomp High Capacity Scales and Aircraft Weighing Systems

Intercomp SW Deluxe Vehicle Scale System

Industrial grade four corner scale system that auto, van, and trailer manufacturers use to fine tune weight and balance to varying design criteria. View individual platform and total weight via CPU with optional self-contained printer. Computes center of gravity, weight as a percentage and stores set up in memory. 1,500 or 2200 lb. capacity per platform.

Intercomp MS450 Mining Scale Capacity: 1,000,000 lb / 500,000 kg

Heavy duty, high capacity, semi portable scale for weighing mining trucks and oversized vehicles in remote locations. Each system has two pads with the capacity for each pad being 1/2 the system capacity. GP1200 Indicator, cabling and charger are standard. Ramps are optional.

AX920 In-Ground Axle Scale Analog

The AX920 series are designed to offer a low cost, efficient and effective alternative to traditional permanent in ground truck scales. They are perfect for truck terminals, highway pullovers, warehouses and distribution centers and is typically half the cost of truck scales.

The pair of 7’ low profile aluminum decks will weigh single and tandem axles. Upgraded 100,000 lb. capacity for weighing oversized and/or specially loaded vehicles. The single channel design will provide the sum of both decks.

Analog output requires GP1200 or customer supplied indicator to calibrate (both sold separately).

AX900 and 920 options

AX900 Multi-Channel Axle Scale

The AX900 AXLE SCALE series provides weigh bridges in a variety of lengths, capacities and configurations to weigh anything from single to multi-axle vehicles. The semi portable, rugged and modular design make them ideal for locations where large permanent scale installations are not feasible. Designed for portable, accurate and high volume weighing applications.

The pair of 11’ low profile decks (4-5.5’ sections) with ramp ends will weigh single, tandem and triple axles. The multi channel design will provide individual axle and total weight. All aluminum structure for light weight portable design.

Digital output allows for interchangeability of GP1200 Indicator, PT-20 CPU, interconnect cables and decks of any length without need for recalibration (all sold separately).

US840 Pallet Floor Scale 40"x 48" 5,000 lb

U shaped scale for easy access for on/off loading of pallets and containers. Require GP1000, GP1200 or customer supplied indicator.

PT300 Wheel Load System

Includes: Two, Four, or Six scale platforms with 20mA output, interconnecting cable, charging cable and carrying case. Available in standard 12" wide platform accomodates single tire (outside tire in dual wheel configuration) or larger PT 300DW sizes.

AX20A-WIM CPU
Indicator for AX920-WIM systems.

GP1000 Battery Operated Indicator

GP2000 Indicator/Remote Display

GP2000EM Combination Digital Indicator 5 Digit Electro-Mechanical

P-DP Battery Operated Tape Printer
Prints Weights Only

PT20 Axle Weigher CPU
Central display unit for AX900 and LP600

PT20 Axle Weigher CPU
Central display unit for PT300 and PT300DW

GP1200 Indicator

Compact battery operated digital weight indicator with 1"/25 mm display. Gross/Net/Tare, Weight accumulation, scale select, alkaline or ni-cad batteries, RS232/RS485 output, full keypad set up and calibration in stainless steel housing.

Intercomp SW-20K Wheel Scale

PW850 Lift Truck Scale

16x36", 20x42", 20x48", 25x48" Capacities: 3000, 5000, 10,000, 20,000 lb

Automatically weigh, check, count, process and load pallets using existing fleet of lift trucks. Fits almost any carriage and enables fast and easy installation. 16 x 36 Class II 5,000 lb with PW2100 Indicator.

Intercomp SWI Vehicle Scale System

Industrial grade four corner scale system that auto, van, and trailer manufacturers use to fine tune weight and balance to varying design criteria. View individual platform and total weight via indicator. Computes center of gravity and weight as a percentage. 1500 or 2,200 lb. capacity per platform.